Invoicing by profession

Invoicing software for carpenters in Antwerp

What matters for carpenters whose business is established in Antwerp: the language to invoice in, the VAT wording to include, a worked example and sending through Peppol to business customers.

Invoicing in Antwerp: the essentials

Locality
Antwerp (Anvers, Antwerpen)
Postcode
2000
Province
Province of Antwerp
Region
Flanders
Invoice language
Dutch
Official VAT wording in
Dutch
Business information
VLAIO
Municipality (NIS code)
Antwerp (11002)
Inhabitants on 1 January 2026
565,615
VAT-registered businesses on 31 December 2025
58,084
Of which NACE-BEL code 43.320
332

Carpenters in Antwerp in figures

On 31 December 2025, 58,084 VAT-registered businesses had their registered office in Antwerp, for 565,615 inhabitants on 1 January 2026. That is 102.7 per 1,000 inhabitants (Flanders: 109.5), close to the regional average.

Code 43.320 of NACE-BEL 2008, “Joinery installation”, is the closest match for carpenters. Antwerp has 332 VAT-registered businesses under it, or 0.57% of the businesses in the municipality (Flanders: 1.8%): the activity is less present here than in the region as a whole. Among Belgium’s 565 municipalities, Antwerp is number 1 for this code.

Between the end of 2024 and the end of 2025, under this code: 38 new VAT registrations in Antwerp and 33 removals. Legal forms: 130 natural persons and 202 companies or other forms.

How to read these figures: Statbel counts each business in the municipality of its registered office and under a single activity code. A business that works in Antwerp from another municipality is therefore not in them.

Carpenters: Antwerp and nearby municipalities

MunicipalityVAT-registered, code 43.320New in 2025Removed in 2025Per 10,000 inhabitants
Antwerp33238335.9
Mechelen72658.0
Lier610615.7
Sint-Niklaas13551016.2
Turnhout577711.8
Flanders13,5179651,11219.6
Belgium18,7411,3621,52615.8

Which language to invoice in Antwerp

A business whose operating seat is in the Dutch-language region writes the legally required parts of its invoices in Dutch. The Flemish decree of 19 July 1973 imposes this for the documents the law requires of businesses, and makes documents that depart from it void.

For a customer established in another country of the European Union or European Economic Area, the decree allows an additional valid version in an official language both parties understand; the Dutch version prevails. For a French-speaking Belgian customer, a courtesy translation may accompany the invoice, not replace it.

Flanders Innovation and Entrepreneurship informs businesses established in Flanders.

What carpenters should watch

A carpenter divides the week between the workshop and the site: first making to measure, then fitting. The gap between order and fitting is long, so a deposit when the quote is signed is the rule. Customers are a mix of private individuals, developers and contractors, and one question returns with every invoice: is the piece fixed to the building, or delivered as furniture?

  • Doors, windows or a staircase fitted into a building are construction work, and kitchen and bathroom cupboards supplied and fixed are on the article 20 list: for a customer that files periodic VAT returns the invoice shows no VAT and reproduces the prescribed text in full.
  • A piece delivered without fitting, a table or stools for example, is a sale of goods: you invoice it with VAT, even to a Belgian business that has a VAT number.
  • The deposit paid on order makes VAT chargeable on the amount received: invoice it by the 15th of the following month, including to a private individual when it relates to construction work.
Full detail for carpenters

Usual VAT rates

These are the rates the profession meets most often. The exact conditions are in Royal Decree no. 20: check borderline cases with your accountant.

21 %
Joinery fitted in business premises or in a home with no reduced rate, and furniture or joinery delivered without fitting.
6 %
Replacing doors or windows in an older private home, provided the conditions and the mention of Royal Decree no. 20 are complied with.

Wording to include on the invoice

When one of these regimes applies, the invoice carries the prescribed text instead of a rate and a VAT amount.

Reverse charge for construction work (co-contractor rule)

A.R. n° 1 / KB nr. 1, art. 20 §3

When · Construction work and installations listed in article 20, invoiced by a business established in Belgium to a taxable customer that files periodic VAT returns. The invoice shows no rate and no VAT amount.

nlVerlegging van heffing. Bij gebrek aan schriftelijke betwisting binnen een termijn van één maand na de ontvangst van de factuur, wordt de afnemer geacht te erkennen dat hij een belastingplichtige is gehouden tot de indiening van periodieke aangiften. Als die voorwaarde niet vervuld is, is de afnemer ten aanzien van die voorwaarde aansprakelijk voor de betaling van de verschuldigde belasting, interesten en geldboeten.
Read the guide

Worked example

A business established in Antwerp invoices a customer in Turnhout. The invoice is written in Dutch.

VAT-registered business customerNo VAT: prescribed wording
DescriptionQuantityUnit priceVATExcl. VAT
Made-to-measure kitchen cupboards, supplied and fixed1 flat fee€6,400.000 %€6,400.00
Bathroom washbasin unit, supplied and fixed2 pc€780.000 %€1,560.00
Fitting on site, two carpenters16 h€54.000 %€864.00
Total excl. VAT
€8,824.00
Total to pay
€8,824.00

nlVerlegging van heffing. Bij gebrek aan schriftelijke betwisting binnen een termijn van één maand na de ontvangst van de factuur, wordt de afnemer geacht te erkennen dat hij een belastingplichtige is gehouden tot de indiening van periodieke aangiften. Als die voorwaarde niet vervuld is, is de afnemer ten aanzien van die voorwaarde aansprakelijk voor de betaling van de verschuldigde belasting, interesten en geldboeten.

Fictional example: the customer is a property developer that files periodic VAT returns; kitchen and bathroom cupboards supplied and fixed are on the article 20 list, hence an invoice without VAT. The same units delivered without fitting would be invoiced with VAT.

Peppol in Antwerp

The structured-invoice obligation is federal: it applies the same way everywhere in Belgium. What varies from one region to another is the language of the invoice, not the channel.

Carpenters invoice both private individuals and businesses: the channel is decided customer by customer.

What OrdoGrid covers

OrdoGrid is Belgian invoicing software with Peppol built in. These are the most useful workflows for this profession, with the plan each requires.

  • Starter · Business

    Quotes & invoices

    Create quotes with Free. To email them, keep the response and continue to the invoice, explore the Starter and Business workflow.

  • Free · Starter · Business

    Send and receive through Peppol

    Unlimited Peppol receiving and one outgoing invoice per month with Free, free forever with no credit card. Starter adds unlimited sending.

  • Business

    Project invoicing

    Bring together a project’s work and tracked time to prepare its invoice. Projects and time tracking belong to Business.

The Free plan stays free forever: unlimited Peppol receiving and one outgoing Peppol invoice per month, with no credit card.

Frequently asked questions

Which language should you invoice in when your business is established in Antwerp?

A business whose operating seat is in the Dutch-language region writes the legally required parts of its invoices in Dutch. The Flemish decree of 19 July 1973 imposes this for the documents the law requires of businesses, and makes documents that depart from it void. For a customer established in another country of the European Union or European Economic Area, the decree allows an additional valid version in an official language both parties understand; the Dutch version prevails. For a French-speaking Belgian customer, a courtesy translation may accompany the invoice, not replace it.

How many carpenters are there in Antwerp?

At the end of 2025, Statbel counted 332 VAT-registered businesses under NACE-BEL code 43.320 (“Joinery installation”) with a registered office in Antwerp, 130 of them natural persons. Businesses established elsewhere that come to work there are not counted.

Does a carpenter’s deposit invoice to a trade customer have to go through Peppol?

Yes, when the customer is a VAT-registered business established in Belgium: the law names advance payments explicitly, so the deposit invoice is a structured invoice, like the final one. The quote and the deposit request are not invoices and stay outside the obligation.

Does a carpenter invoice a made-to-measure kitchen to a business without VAT?

Yes, if the cupboards are supplied and fixed and the customer is a taxable person that files periodic VAT returns: the operation is on the article 20 list and the invoice carries the legal reverse-charge text. If you deliver the units without fitting them, it is a sale of goods with VAT.

Do you need different invoicing software in Antwerp?

No: VAT rules and the Peppol obligation are federal. Check above all that the software produces your documents in the language required for your operating seat. In OrdoGrid the document language is set in the company profile, and the prescribed texts are printed in French or Dutch.

Guides to go further

The Free plan stays free forever: unlimited Peppol receiving and one outgoing Peppol invoice per month, with no credit card.

Create a free account